Order your Back Yard Greenhouses Kit

Introducing Murray’s Backyard Greenhouse Kits


Kit provides a 10’ wide Greenhouse with a 8’ 8” high peak & 4’ arch spacing
Every kit includes galvanized steel arches, ridge support, wind bracings, arch spacers (purlins) with fastening brackets, base brackets, nuts/bolts, channel lock/wire to se-cure plastic, and a single layer of 6 mil plastic, including end wall plastic, and 2 roll-up sides attachments.

Foundation, end wall framing, and door(s) are not included, so the end user can customize these components according to their preference. These materials can be easily found in most hardware stores. Foundations are usually wooden 4”x4”s rebared to the ground: two parallel runs the same width apart as your greenhouse and each the same length of your greenhouse. Anchoring the foundation is critical to the long term life of the building.

Optional Add-on
Double Plastic Layer with Inflation Kit
Double layer poly with air between reduces heat loss by 30% and minimizes condensation. It is very effective for stiffening buildings in severely windy and snowy areas. This kit includes hanger bracket with adaptor to fasten to the inside layer of the cover. Requires standard 110V electrical connection.

Kit provides a 10’ wide Greenhouse with a 8’ 8” high peak & 4’ arch spacing

12’ Long (4 Arches) – $1499
Add 2nd plastic layer & inflation kit: $399

24’ Long (7 Arches) – $2599
Add 2nd plastic layer & inflation kit: $449

AVAILABLILITY EXPECTED APRIL 2021 — ORDER YOURS TODAY!
Murray’s Garden Centre
1525 Portugal Cove Road, Portugal Cove-St. Philips
info@murraysgardens.com
709-895-2800